Stone Computers Knowledgebase

What Ports Do I need to have Unblocked to Allow Meraki Devices to Communicate with the Cloud Controller?

Article ID: 507
Last updated: 17 Sep, 2015
Article ID: 507
Last updated: 17 Sep, 2015
Revision: 3
Views: 730
Posted: 17 Sep, 2015
by Andrew Sharrad
Updated: 17 Sep, 2015
by Andrew Sharrad

Meraki Cloud Controller

The Meraki Cloud Controller architecture eliminates the need for a dedicated hardware controller on-site for a wireless infrastructure. However, the access points need to be able to access the Meraki Cloud services on the internet through a range of ports and addresses. If your firewall blocks these, you may need to make configuration changes to unblock the necessary ports and addresses. These are shown in the attached spreadsheet.

Note: If access to these ports or addresses is blocked, configuration updates or changes may be impossible. In addition, new clients may be unable to authenticate or use wireless services or any other services provided by your Meraki infrastructure.

Applies to:

  • Meraki Cloud Controller Based Products

This article was:  
Article ID: 507
Last updated: 17 Sep, 2015
Revision: 3
Views: 730
Posted: 17 Sep, 2015 by Andrew Sharrad
Updated: 17 Sep, 2015 by Andrew Sharrad
Attached files