How to change the Serial ATA (SATA) Controller Mode using the Intel Visual BIOS

Article ID: 107
Last updated: 24 Aug, 2017
Revision: 4
print  Print
share  Share
Views: 3496
Posted: 09 Jul, 2013
by Andrew Sharrad
Updated: 24 Aug, 2017
by Andrew Sharrad

Intel Visual BIOS

The Intel Visual BIOS is the new BIOS layout and is the default in the Q77 series BIOS with later BIOS revisions.

The guide below explains how to find the Serial-ATA Controller Mode setting which is useful if you need to disable AHCI model for legacy operating systems, such as Windows XP.

Instructions

  • Enter the BIOS using the F2 key as normal
  • Look for the Advanced button in the top right hand side and click on it

  • Click on Devices & Peripherals:

  • Click on the SATA sub-tab:

  • Click on the Chipset SATA Mode drop down list. This enables you to change the SATA controller mode.

  • Press F10 as normal to exitsave the changes. You will get a confirmation prompt.
Note: Instead of using the Visual BIOS, you can switch to the Classic BIOS by using the Classic Mode button in the top left hand corner of the main Visual BIOS screen.

Applies to:

  • Stone desktop and All-In-One products using 7-series and 8-series Intel motherboards
This article was:  


Also read
item How to Troubleshoot Machines that fail to start Windows

Prev     Next
How to change the DMI information on a Stone system with a 7...       How to Clear the CMOS / BIOS Settings on an Intel Desktop Board