Stone Computers Knowledgebase

How to perform the ANX USB-C Firmware update on the 11th Gen Stonebook Pro and Stonebook Lite

Article ID: 951
Last updated: 20 Jun, 2023
Article ID: 951
Last updated: 20 Jun, 2023
Revision: 1
Views: 149
Posted: 20 Jun, 2023
by Jason White
Updated: 20 Jun, 2023
by Jason White

What does this fix?

This firmware is designed to update the ANX chip in the notebook that controls the USB-C DisplayPort. The update brings better compatibility with external USB-C connected monitors and docking stations.

Prerequisites

The following instructions apply to the 11th gen Stonebook Pro and Stonebook Lite - L115A, P113A, P115A. Before running the ANX update tool, please ensure you have updated the BIOS, EC, and ANX drivers to the latest versions. These can all be found on the Stone Driver Finder

Note: Please ensure the notebook is plugged into the AC mains before proceeding with any EC or BIOS update.

Process

Download the latest ANX Firmware update tool, also found on the Stone Driver Finder, and extract the files, we then need to ascertain what version of the firmware we're running. To do this execute the " ANX74x_7327_Show.exe" found in the Show_tool_V0.6 folder. This will generate a version text file called log.txt. Check the version you are running and if it's older than 1.09.04 then proceed with the steps below.

1. Run the ANX7411_OCM-V1.904_V17.exe to initiate the update. 

2. Run the Clevo_V19_PDO_40W_F7_04.exe to complete the update.

3. Restart the system

4. Run the ANX74x_7327_Show.exe in the show tool folder to check if the system has updated correctly. OCM current version = 1904 means it has updated correctly to the latest version 1.09.04.

Applies to:

  • Stonebook Lite L115A - NOTCHA-338
  • Stonebook Pro P113A & P115A - NOTCHA-339 & NOTCHA-340
This article was:  
Article ID: 951
Last updated: 20 Jun, 2023
Revision: 1
Views: 149
Posted: 20 Jun, 2023 by Jason White
Updated: 20 Jun, 2023 by Jason White
Tags