Article ID: 602
Last updated: 23 Aug, 2016
ProblemWith some BIOS versions and configurations it may not be possible to boot in Legacy mode from a USB pen drive. The USB pen drive is only shown as a UEFI bootable device. A non-UEFI choice for the USB pen drive is not offered. ScenarioCustomers trying to boot Windows 7 or Windows 8.1 media from a USB pen drive. The USB pen drive is formatted as FAT32 (as is recommended). BIOS Settings:
The USB Device is not recognised as being available for non-UEFI booting. The pen drive can only be booted in UEFI mode. CauseThis issue appears to be caused by a BIOS bug in the Stone version of the 0801 BIOS. The issue may also be present in other versions of the Stone customised BIOS up to and including 0801. Note: Stone customised BIOSes can be identified by the Stone pebble logo being briefly displayed when the system is turned on. The BIOS identifiers or version numbers are the same as the reference Asus' BIOS.
ResolutionIf customers are affected by this issue, and specifically need to Legacy boot from USB media and cannot, the BIOS will need to be upgraded. There are two options available. Option 1 Install the latest Stone BIOS, version 1802 or later. Please note that once 1802 has been installed it may not be possible to downgrade back to version 0801 as the management engine firmware is upgraded as part of the 1802 package.
Option 2 Install the reference Asus 0801 BIOS, which can be downloaded here.
Further InformationTypical BIOS settings for Legacy Boot:
Note: There is no indication from customers that this issue affects SATA based hard drives. This issue just affects USB hard drives or pen drives.
Applies to:
This article was:
Article ID: 602
Last updated: 23 Aug, 2016
Revision: 8
Views: 1825
Posted: 18 Aug, 2016 by
Andrew Sharrad
Updated: 23 Aug, 2016 by
Andrew Sharrad
Also read
|