How to Update the BIOS on the Stone NT210-H Laptop

How to Update the BIOS on the NT210-H Laptop

BIOS Updates are available for the Stone NT210-H Haswell based laptop.

Note: Please only update the BIOS if necessary. The BIOS should not be updated unless you are experiencing a specific issue which requires an update. This BIOS update is designed to be used by Administrators. Contact Stone Support for further advice.

What you need to Perform the Update

Prepare a Windows 98SE DOS Bootable pen drive
Download the latest BIOS file (BIOS 1.03.07 / EC 1.03.06)

Steps

Extract the downloaded file to the pen drive.
Ensure that the system to be updated is connected to the AC mains and also has a battery level of at least 20%.
Boot the system to be updated from the pen drive.
Run ECFLASH to update the EC Firmware.
Then shut the system down if it doesn't turn off automatically.
Boot the system up again and start it again from the pen drive.
Run the FLASH batch file to flash the main BIOS.

Note 1: Do not attempt to use this BIOS update procedure inside a "DOS" box or command prompt inside another operating system. Always run all parts of the update from a pure DOS boot.

Note 2: Always ensure that the laptop is connected to the mains and that the battery has at least 20% charge before attempting to perform the flash.

Applies to:

Stone NT210-H Laptop - NOTCHA-272