I need to reset the AMT Password on an Intel Q or B Series Motherboard. How can I do this?

Clearing the AMT Configuration or Settings

Intel Q Series desktop motherboards contain AMT functionality. AMT functionality and settings are not cleared by resetting the main CMOS by loading BIOS defaults. Intel B series boards can also have AMT functionality and again the AMT settings are not cleared by resetting the main CMOS by loading BIOS defaults.

To clear the AMT settings, either perform a full manual settings clear or using the dedicated MEBX (Management Engine BIOS Extension) Reset Jumper.

Using the MEBX Reset Jumper (the recommended method)

Location of the header - DQ77MK:

Location of the header - DQ77CP:

Location of the header - DQ77KB:

Location of the header - DB75EN:

Location of the header - DQ67SW:

Location of the header - DQ67OW:

Location of the header - DQ67EP:

Note: Do not leave the AC mains connected whilst shorting the MEBX reset header. Do not have the system switched on whilst shorting the MEBX header as you may damage the motherboard.

Main Full Settings Clear (alternative method)

After clearing the settings using either method, the AMT default password of admin should be restored.

Applies to:



Article ID: 196
Last updated: 14 Oct, 2013
Revision: 6
Stone Branded Products -> Desktop PCs and All-in-One (AIO) -> Frequently Asked Questions (FAQ) -> I need to reset the AMT Password on an Intel Q or B Series Motherboard. How can I do this?
https://kb.stonegroup.co.uk/index.php?View=entry&EntryID=196