Changing DMI Strings
Some of the DMI strings in Stone N108 Netbooks can be changed using the utilty attached to this article. To run the utility, you will need a Windows 98SE bootable USB pen drive.
- Make the USB pen drive bootable.
- Extract the utility to the pen drive.
- Boot the system from the pen drive (use the F10 option to get the boot menu).
- Run DMI.BAT
The following strings will be prompted for:
- System serial number (this should be the serial number on the Stone serial number sticker).
- Bay Number (normally this is not used; Stone systems may have a QC tracking number here).
- Chassis Asset Tag (this should be used for the end-customer asset tag number).
This DMI utility will also program "OEGStone" into the BIOS as a manufacturer string.
Applies to:
- Stone / Clevo Netbook model N108 (NOTCHA-241)