Utility to Change DMI Information
Please use the attached utility if you need to change the DMI information in either DOS or Windows on Stone / MSI H61 based systems. You can use it to change the system serial number, chassis serial number or asset number.
This DMI utility will also program "OEGStone" into the BIOS as a manufacturer string.
Instructions
DOS
- Boot to DOS using a Windows 98SE USB pen drive
- Run the DMI250U utility
Windows
- Use the x64 or x86 batch file depending on which type of Windows you are running. This will require administrative rights (an elevated command prompt).
Note: This utility will not work on Intel branded desktop boards. The Windows version of the utility requires BIOS 2.7 or higher to program all DMI information including the asset tag correctly on the Stone H61M-P31 G3 (non-Windows 8 version).
Last Updated 1/5/14.
Applies to:
- Stone systems based on the MSI H61 and H81 motherboard platforms